|
Post by Gothic Kustomz on Jun 26, 2013 10:54:44 GMT -5
Yep I knew it, burn out! yea on the Twisted Intentions, was just a matter of time, so for, an inspiration build, "SIGH" I'm gonna do this one, I have everything i need right here, this will be sorta just outa the box, with a few scratch built things, ummmm sorta: Using Windex as a dechromer, tho I'm sure ya could use Amonia, as that is the leading ingrediant in Windex, hmmmmmm, I got a jug of that too, should try it out see if it works: Most of the suspension that will be scratch built, so keep an eye out on here. Dechromed, using straight Amonia, now if you go this route, use a toothbrush to scrub, right out of the amonia bath, the old under clear coat came right off, sat in the amonia about 2-3 hours, then rinse, and wash using dish detergant.
|
|
|
Post by Gothic Kustomz on Jun 26, 2013 10:55:04 GMT -5
OK body smoooooth, and ready to french the taillights, I'm using a stir straw from my local circle K store. OK, gang, here she is, in her first coat of primer, as u can see the frenching went very well, just a few things to clean up, soon as it sets up I will post with the tailights in Just a lil fine tuning, and we're on our way, wont be able to center till I get all the paint done:
|
|
|
Post by rustyrat1960 on Jun 27, 2013 20:09:33 GMT -5
Really diggin' yer bullet lenses Man!
|
|
|
Post by harron68 on Jun 28, 2013 7:33:06 GMT -5
It seems easy when U show it, but to get it right it takes practice on the rear lites. Dechroming looks successful, and I guess the window cleaner would work, if it has enough ammonia in it. Thanx!
|
|
|
Post by Gothicz House Of Kustomz on Jul 14, 2013 11:18:29 GMT -5
It seems easy when U show it, but to get it right it takes practice on the rear lites. Dechroming looks successful, and I guess the window cleaner would work, if it has enough ammonia in it. Thanx! Windex, works great, so does ammonia, bleach, Westlys bleach white, ( white wall cleaner) just to name a few....
|
|
|
Post by Gothicz House Of Kustomz on Jul 16, 2013 6:30:16 GMT -5
Bout time!, FINALLY! first base coat, now to wet sand, and then mask off, then on to second base coat:
|
|
|
Post by Gothicz House Of Kustomz on Aug 17, 2013 9:56:36 GMT -5
OK, to bring ya'll up to date, well till the bad night in the booth anyway: Had a bad night, so now she is back in primer, ready to start the kolor all over again
|
|