Post by scottg on May 18, 2013 18:07:31 GMT -5
Well, here's my latest build all finished. This was the MPC Dodge SuperBee. I painted it in Wet & Wild Buffy the Violet Slayer nail-polish. I ran brake lines from the brake master cylinder to all four wheels. I added a fuel line from the gas tank to fuel pump, then to all three carbs. I made a throttle return spring for it, and drilled out six holes in the three carbs to represent the venturis for the six-pack induction. I used a Detail Master distributor kit, and ran the battery cables and heater hoses. The kit was missing a few parts, so I used a part-box transmission, then had to lengthen the driveshaft. I also added a fuel pump and a coil for the distributor, as well as an oil filter. I added pins to the wheels to represent valve stems. I added seat belts to all four seats, and added flocking for the carpeting. I stripped the chrome and re-did it in Alclad. The decals were from the kit. Anyway, on to the pics:
Here's the engine compartment:
Here's the interior:
and Here's the Underside:
Here's the engine compartment:
Here's the interior:
and Here's the Underside:
